Valve Rocker Assembly: Assembly
WARNING: This page is about a different variant/trim than selected.
- Install the adjusting screw and nut to valve rocker.
- Arrange the valve rocker arms, springs and shaft supports in assembly order, and then insert the valve rocker shaft.
Tightening torque (Shaft supports installing bolts):
5 N.m (0.5 kgf-m, 3.6 ft-lb)
NOTE: Valve rocker arms, rocker shaft and shaft supports have identification marks. Ensure the parts with same markings are properly assembled. - Install the valve rocker shaft securing bolts.