LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Security And Locks) >> Door Lock Control System >> Inspection >> Check Power Supply And Ground Circuit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Check Power Supply And Ground Circuit

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
POWER SUPPLY AND GROUND CIRCUIT

Step Check Yes No
1 CHECK POWER SUPPLY. 
  1. Disconnect the integrated module harness connector.
  2. Measure the voltage between the harness connector terminal and chassis ground.

Connector & terminal 
(B281) No. 1, 2 (+) - Chassis ground (-): 		 Is the measured value more than 10 V? Go to step 2.  Check the harness for open circuits or shorts between the integrated module and the fuse.
2 CHECK GROUND CIRCUIT. 
Measure the resistance between the harness connector terminal and chassis ground.
Connector & terminal 
(B281) No. 4, 13 - Chassis ground: 		 Is the measured value less than 10 Ω? The power supply and ground circuit is OK. Repair the harness.
scientia non olet · About LEMON Manuals