LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Data Link Connector >> Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Data Link Connector: Note

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. This connector is used both for OBD-II general scan tools and the Subaru Select Monitor.
  2. Terminal No. 4 to No. 6 of the data link connector is used for the Subaru Select Monitor signal.
    CAUTION: Do not connect any scan tools other than the OBD-II general scan tools and the Subaru Select Monitor, because the circuit for the Subaru Select Monitor may be damaged.
    Fig 1: Identifying Data Link Connector Terminals
    G03748844Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals