LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Impact Sensor: Installation

  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Connect the ground cable from battery.
  7. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals