LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Outback F6-3.0L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Brake Light Switch: Service and Repair

Stop Light Switch

REMOVAL
1. Disconnect battery ground cable.
2. Disconnect stop light switch connector.





3. Loosen nuts, and unscrew stop light switch to remove.

INSTALLATION
1. Screw the stop light switch onto a bracket and secure it temporarily with a nut.





2. Adjust stop light switch position, and then tighten the nut.
Tightening torque: 8 Nm (0.8 kgf-cm, 5.8 ft. lbs.)
scientia non olet · About LEMON Manuals