LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Outback F6-3.0L >> Repair and Diagnosis >> Body and Frame >> Fender >> Front Fender >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Fender: Service and Repair

FENDER PANEL

REMOVAL

1. Disconnect ground cable from battery.
2. Remove side sill spoilers. (If fitted)
3. Remove side protectors and fender protectors. (OUTBACK)
4. Remove front bumper face.
5. Remove headlights.
6. Remove mud guard.
7. Remove bolts and clips to remove front fender.






INSTALLATION

1. Install in the reverse order of removal.
2. When fender panel is installed, clearance between fender panel and hood or front fender must be equal.

Tightening torque: 7.35 N.m (0.75 kgf-m, 5.4 ft-lb)
scientia non olet · About LEMON Manuals