LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Forester XS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine (Diagnostics) (H4SO) >> Subaru Select Monitor >> Operation >> Led Operation Mode For Engine
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Led Operation Mode For Engine

  1. On << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
  2. On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On << Engine Diagnosis >> display screen, select the {Current Data Display & Save} and press the [YES] key.
  5. On << Data Display Menu >> display screen, select the {Data & LED Display} and press the [YES] key.
  6. Using the scroll key, move the display screen up or down until the desired data is shown.
    • A list of support data is shown in the following table.
      Fig 1: LED Operation Mode For Engine Chart
      G00995806Courtesy of SUBARU OF AMERICA, INC.
      NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals