LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Baja Turbo, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry System >> Inspection >> Check Buzzer Chirp Setting
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Check Buzzer Chirp Setting

CHECKING STEPS REFERENCE

Step Check Yes No
1 CHECK BUZZER CHIRP SETTING. 
  1. Check the current setting of the buzzer chirp.
  2. Remove the key from the ignition switch.
  3. Close all doors and the rear gate.
  4. Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer signal chirp? Buzzer chirp function is OK. Go to step 2.
2 CHECK BUZZER CHIRP SETTING. 
  1. Press the UNLOCK/DISARM button once.
  2. Press both the LOCK/ARM and UNLOCK/DISARM buttons for more than 2 seconds.
  3. Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer signal chirp? Buzzer chirp function is OK. Check the transmitter function. < Ref. to CHECK TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System . >
scientia non olet · About LEMON Manuals