LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Outback F6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Tank Pressure Sensor: Service and Repair

REMOVAL

1. Set the vehicle on the lift.
2. Open fuel flap lid, and remove fuel filler cap.




3. Disconnect battery ground cable.
4. Lift-up the vehicle.
5. Disconnect connector from fuel tank pressure sensor and atmospheric pressure solenoid valve.




6. Disconnect pressure hose from fuel tank pressure sensor.




7. Remove fuel tank pressure sensor and atmospheric pressure solenoid valve with bracket.




8. Remove atmospheric pressure solenoid valve from bracket.

NOTE: Fuel tank pressure sensor cannot be removed because it is integral with bracket.

INSTALLATION




Install in the reverse order of removal.

Tightening torque: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)
scientia non olet · About LEMON Manuals