LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Outback F6-3.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Front
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front

Front Disc Rotor

REMOVAL
1. Loosen wheel nuts, jack-up vehicle, support it with safety stands, and remove wheel.





2. Remove caliper body from housing, and suspend it from strut using a wire.





3. Remove the disc rotor.

NOTE: If disc rotor seizes up within the hub, drive disc rotor out by installing an 8-mm bolt in holes B on the rotor.

4. Clean mud and foreign particles from caliper body assembly and support.

INSTALLATION
1. Install the disc rotor.
2. Install the caliper body to housing.

Tightening torque: 78 Nm (8 kgf-cm, 58 ft. lbs.)
scientia non olet · About LEMON Manuals