October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Manifold Pressure/Vacuum Sensor: Service and Repair

Pressure Sensor

REMOVAL

1. Disconnect the ground cable from battery.

2. Disconnect the connector from the pressure sensor.

3. Remove the pressure sensor.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 1.6 N.m (0.16 kgf.m, 1.2 ft.lb)

NOTE: Replace the O-ring with a new one.