October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair

REMOVAL

1. Disconnect the ground cable from battery.

2. Remove the bolt which install crankshaft position sensor to the cylinder block.

3. Remove the crankshaft position sensor, and disconnect the connector from it.

INSTALLATION

Install in the reverse order of removal.

Tightening torque:
T: 6.4 N.m (0.65 kgf.m, 4.7 ft.lb)