October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

VDC Control Module (VDC-CM): Installation

Install in the reverse order of removal.

CAUTION: After completion of installation procedure, the following two position settings must be made.

Steering angle sensor center positioning
Yaw rate and lateral G sensor 0 positioning

These procedures are necessary for VDCCM to later recognize what position the vehicle is in.

For procedures for the above two settings, Refer to ADJUSTMENT , VDC Control Module (VDC-CM).