LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Abs (Diagnostics)) >> SUBARU Select Monitor >> Operation >> Clear Memory Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clear Memory Mode

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press [YES] key.
  2. On the << System Select Menu >> display screen, select the {Brake System} and press [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press [YES] key.
    Fig 1: Subaru Select Monitor Display (Clear Memory Mode)
    G00959641Courtesy of SUBARU OF AMERICA, INC.
  5. When the "Done" and "turn ignition switch to OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the OEM - GENERAL INFORMATION .
scientia non olet · About LEMON Manuals