Pressure Sensor: Installation

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Replace O-ring with a new one.

Tightening torque: 1.6 N.m (0.16 kgf-m, 1.2 ft-lb)

Fig 1: Installing Pressure Sensor
Courtesy of SUBARU OF AMERICA, INC.