LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Starter 3.0L) >> Starter >> Inspection >> Switch Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch Assembly

WARNING: This page is about a different variant/trim than selected.

Be sure there is continuity between terminals S and M, and between terminal S and ground. Use a circuit tester (set in "ohm").

Also check to be sure there is no continuity between terminal M and B.

Terminal / Specified resistance: 

  1. S - M / Continuity
  2. S - Ground / Continuity
  3. M - B / No continuity
Fig 1: Checking Continuity Between Terminals S & M
G02113564
scientia non olet · About LEMON Manuals