LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester S, Standard >> Repair and Diagnosis >> Transmission >> Clutch System >> Service Procedure >> Operating Cylinder >> Removal And Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation

  1. Remove air cleaner case.
    Fig 1: Identifying Air Cleaner Case
    G02013233
  2. Remove clutch hose from operating cylinder.
    CAUTION: Cover hose joint to prevent clutch fluid from flowing out.
    Fig 2: Identifying Clutch Operating Cylinder
    G02013234
  3. Remove operating cylinder from transmission.
    Fig 3: Removing Operating Cylinder
    G02013235
  4. Install in the reverse order of removal.
    NOTE: Before installing operating cylinder, apply grease (SUNLIGHT 2: P/N 003602010) to contact point of clutch release lever and operating cylinder.

    Tightening torque: 

    1. T1:  18+/-3 N.m (1.8+/-0.3 kg-m, 13.0+/-2.2 ft-lb)
    2. T2:  37+/-3 N.m (3.8+/-0.3 kg-m, 27.5+/-2.2 ft-lb)
    Fig 4: Installing Operating Cylinder
    G02013236
  5. After bleeding air from operating cylinder, ensure that clutch operates properly. See ON-CAR SERVICE  .
scientia non olet · About LEMON Manuals