LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul Automatic Transmission >> Inhibitor Switch >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inhibitor Switch: Removal

  1. Move select lever to neutral position.
  2. Remove air intake chamber and duct.
  3. Disconnect inhibitor switch connector.
    Fig 1: Disconnecting Inhibitor Switch Connector
    G02037022
  4. Remove Exhaust Pipe 
    • Forester and Impreza:  Remove front exhaust pipe.
    • Legacy and Outback:  Remove center exhaust pipe.
  5. Remove snap pin from range select lever.
    Fig 2: Removing Snap Pin From Range Select Lever
    G02037023
  6. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly From Transmission Case
    G02037024
  7. Remove bolts.
    Fig 4: Removing Bolts
    G02037025
  8. Move range select lever to parking position (left side).
    Fig 5: Moving Range Select Lever To Parking Position (Left Side)
    G02037026
  9. Removing inhibitor switch from transmission.
    Fig 6: Removing Inhibitor Switch From Transmission
    G02037027
scientia non olet · About LEMON Manuals