LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Servicing >> Removal & Installation >> Inhibitor Switch >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inhibitor Switch: Installation

  1. Install inhibitor switch to transmission case. See Figure .
  2. Move range select lever to neutral position.
  3. Using stopper pin, tighten bolts of inhibitor switch. See Figure .
  4. Install select cable to range select lever.
  5. Install plate assembly to transmission. See Figure .
  6. Install snap pin to range select lever. See Figure .
  7. Install center exhaust pipe.
  8. Connect inhibitor switch connector. See Figure .
  9. Install air intake chamber and duct.
scientia non olet · About LEMON Manuals