LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Service Procedure >> Lubrication >> Replacement >> Oil Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Replacement

  1. After stabilization and discharge, replace the component, adding the appropriate amount of oil (ZXL200PG) to the new component before installation.
    Fig 1: Refrigerant Oil Capacity Chart
    G02002846
  2. If the compressor is replaced (after stabilization):
    1. Drain and measure the oil from the original compressor.
    2. Drain the oil from the replacement compressor and refill with the same amount that was drained from the original [20 ml (0.7 US fl oz, 0.7 Imp fl oz) minimum]. Always use ZXL200PG for the replacement oil.
scientia non olet · About LEMON Manuals