LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Service Procedure >> Compressor >> Inspection >> Compressor Clutch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Compressor Clutch

NOTE: Compressor clutch trouble is often caused by clutch slippage and noise. Check and take corrective measures, as required.
  1. Remove belt cover.
    Fig 1: Removing Belt Cover
    G02002847
  2. Check the clearance between drive plate and pulley over the entire perimeter is within specifications.

    Clearance:  0.45+/-0.15 mm (0.0177+/-0.0059 in)

    Fig 2: Checking Compressor Clutch Clearance Between Drive Plate & Pulley
    G02002848
  3. Check that voltage applied to magnetic coil is at least 10.5 volts.
  4. When noise is noted, check that it originates in either compressor or pulley bearing.
scientia non olet · About LEMON Manuals