LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnostics >> Engine Control Module >> Removal And Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation

  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02001230
  2. Remove side sill front cover.
    Fig 2: Removing Side Sill Front Cover
    G02001231
  3. Detach floor mat of front passenger seat.
    Fig 3: Detaching Floor Mat Of Front Passenger Seat
    G02001232
  4. Remove protect cover.
    Fig 4: Removing Protect Cover
    G02001233
  5. Remove nuts which hold ECM to bracket.
    Fig 5: Removing Nuts Which Hold ECM To Bracket
    G02001234
  6. Remove clip from bracket.
    Fig 6: Removing Clip From Bracket
    G02001235
  7. Disconnect ECM connectors.
    Fig 7: Disconnecting ECM Connectors
    G02001236
  8. Take out ECM.
    Fig 8: Removing ECM
    G02001237
  9. Install in the reverse order of removal.
    CAUTION: When replacing ECM, be careful not to use the wrong specification. ECM to avoid any damage to the fuel injection system.
scientia non olet · About LEMON Manuals