LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> Steering >> Steering Gear >> Power Rack >> Overhaul >> Power Steering Pump >> Disassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Pump: Disassembly

  1. Place pump in a soft-jawed vise. Remove reservoir and pipe from pump. Remove rear cover. See Figure . Remove gasket and dowel pins (if needed). Remove cam ring, rotor with vanes and side plate with wave washers. Discard "O" rings.
  2. Loosen and remove outlet connector. Remove control valve with spring. Remove snap ring from front case. Push shaft from rear of housing. Remove seal. Inspect all components for wear or damage.