LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Forester S, Automatic >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering >> Service Procedure >> Control Valve (Power Steering Gearbox) >> Assembly >> Valve Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Valve Assembly

CAUTION: Use only SUBARU genuine grease for gearbox.

Specified grease for gearbox:  VALIANT GREASE M2 (Part No. 003608001)

  1. Apply specified grease to dust cover.
    Fig 1: Applying Grease To Dust Cover
    G02002575
  2. Install dust cover on valve assembly.
  3. Apply genuine grease to pinion gear and bearing of valve assembly.
    Fig 2: Applying Grease To Pinion Gear & Bearing
    G02002576
  4. Install gasket on valve assembly. Insert valve assembly into place while facing rack teeth toward pinion.
    CAUTION: Be sure to use a new gasket.
    NOTE: Do not allow packing to be caught when installing valve assembly.
    Fig 3: Installing Valve Assembly
    G02002577
  5. Tighten bolts alternately to secure valve assembly.

    Tightening torque:  25+/-5 N.m (2.5+/-0.5 kg-m, 18.1+/-3.6 ft-lb)

    CAUTION: Be sure to alternately tighten bolts.
scientia non olet · About LEMON Manuals