LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1999 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Ignition Timing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Timing

  1. Ensure engine is at normal operating temperature and idle speed is correct. Shift transaxle to Neutral (M/T) or Park (A/T) position. Connect timing light to No. 1 spark plug wire.
  2. Observe timing marks, located on crankshaft pulley. See IGNITION TIMING SPECIFICATIONS  table. If timing is not as specified, check self-diagnostic system for Diagnostic Trouble Codes (DTCs). Repair as necessary. See appropriate SELF-DIAGNOSTICS article.
    IGNITION TIMING SPECIFICATIONS (1) (Degrees BTDC @ RPM)

    Application Auto. Trans. Man. Trans.
    Forester 15 @ 700 15 @ 700
    Impreza & Outback Sport
    2.2L (California) 15 @ 700 15 @ 700
    2.2L (Federal) 15 @ 700 10 @ 700
    2.5L 15 @ 700 10 @ 700
    Legacy & Outback
    2.2L (California) 15 @ 700 15 @ 700
    2.2L (Federal) 15 @ 700 10 @ 700
    2.5L 15 @ 700 15 @ 700
    (1) To improve stability, timing is controlled while engine is idling. Timing range is plus or minus 8 degrees (all vehicles).
scientia non olet · About LEMON Manuals