LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1995 >> Legacy Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Blower Switch

Remove heater control panel. See HEATER CONTROL PANEL  under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between specified terminals with blower switch in specified position. See BLOWER SWITCH TEST table. See Fig 1 . Replace blower switch if it does not test as specified.

Fig 1: Testing Blower Switch
G95C60923Courtesy of SUBARU OF AMERICA, INC.
BLOWER SWITCH TEST

Switch Position Continuity Between Terminal No.
1 1, 2; & 6
2 1, 3; & 6
3 1, 4; & 6
4 1, 5; & 6
scientia non olet · About LEMON Manuals