LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1995 >> Legacy Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Testing >> Vacuum Pump & Valve Assembly >> Function Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Function Test

  1. Turn engine off. Disconnect electrical connector from vacuum pump and valve assembly. Apply battery (+) power to terminal No. 2, and ground terminals No. 1 and 4. SeeFig 1 . Ground terminal No. 3. If throttle does not fully open within 3 seconds, replace vacuum pump and valve assembly.
  2. If throttle fully opens within 3 seconds, remove battery (+) power from terminal No. 2. If throttle does not fully close within 3 seconds, check actuator. See ACTUATOR  under COMPONENT TESTS. If actuator is okay, replace vacuum pump and valve assembly.
Fig 1: Identifying Vacuum Pump & Valve Assembly Connector Terminals
G93B02311Courtesy of SUBARU OF AMERICA, INC.