LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1991 >> Justy Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment >> Loyale, XT & XT6 (Rear)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Loyale, XT & XT6 (Rear)

  1. Remove wheel. Loosen outer arm mounting bolts. See Figure. If toe-in is excessive, push/pull rear axle toward rear of vehicle while tightening outer arm mounting bolts.
  2. If toe-out is excessive, push/pull rear axle toward front of vehicle while tightening outer arm mounting bolts. Changing toe-in will change camber angle. Changing camber angle will change toe-in measurement. Tighten outer arm mounting bolts to 94-108 ft. lbs. (127-147 N.m).
scientia non olet · About LEMON Manuals