LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1990 >> Loyale Base, 4D Sedan, 1.8 4, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel Pump >> Engine Controls - Remove/Install/Overhaul >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Controls - Remove/Install/Overhaul: Removal

Release the pressure of the fuel system, see NOTE above. Keep the pump harness connector disconnected. Jack up the vehicle. Clamp the middle portion of the thick hose connecting the pipe (coupling) and pump. Prevent the fuel from flowing out of the fuel tank.

CAUTION: DO NOT  bend the hose sharply; otherwise it may be damaged.

Loosen the hose clamp, and disconnect the hose. Remove three pump bracket mounting bolts, and remove the pump together with the pump damper.

scientia non olet · About LEMON Manuals