October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil Resistance Check - JUSTY CARBURETED
- Disconnect 4-wire connector at ignition coil/power transistor assembly. Check primary resistance between terminals No. 2 and 3. See Fig 1
. If resistance is not .81-.99 ohm, replace coil.
- To check secondary resistance, connect ohmmeter between coil secondary tower and terminal No. 3 of 4-wire connector. If resistance is not 8500-11,000 ohms, replace coil.
Courtesy of SUBARU OF AMERICA, INC.