LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1987 >> DL 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Fuel Injection System - BOSCH AFC >> Testing >> Airflow Meter Potentiometer
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Airflow Meter Potentiometer

Remove rubber cover from electrical connector on airflow meter. Leave connector connected. Connect volt/ohmmeter between terminals and note readings. See SUBARU AIRFLOW METER RESISTANCE  table. If readings are not to specifications, check fuse, ignition relay, wiring or replace airflow meter.

NOTE: Do not start engine during this test. Place the ignition switch in the "OFF" or "ON" position as indicated.
SUBARU AIRFLOW METER RESISTANCE

Ign. Sw. Wire Colors Readings
Off Black-Ground 0-10 Ohms
Off Brown-Ground 0-10 Ohms
On Red-Brown 10-12 Volts
On White-Brown 1-2 Volts
On White-Brown (1) 2-10 Volts
(1) Measure voltage while blowing into inlet side of airflow meter.