LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1985 >> RX >> Repair and Diagnosis >> Electrical >> Starter - 1.8L Engine >> Overhaul >> Component Testing >> Solenoid Pull-In Coil Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Solenoid Pull-In Coil Test

Connect "C" terminal and ground. Connect a 12-volt battery positive lead to terminal "50". See Fig 1. Plunger should extend firmly. If not, replace solenoid.

Fig 1: Solenoid Pull-In Coil Test Connect battery positive to terminal "50" on Subaru
G29429
scientia non olet · About LEMON Manuals