LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2013 >> xD Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Integration Relay >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Integration Relay: Removal: Removal

  1. REMOVE NO. 1 RELAY BLOCK COVER 
  2. REMOVE INTEGRATION NO. 1 RELAY 
    Fig 1: Removing Integration Relay
    GTY161187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
    2. Disconnect the 3 connectors.
scientia non olet · About LEMON Manuals