LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2011 >> xD Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) >> Ignition Switch >> Inspection >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Switch: Inspection: Inspection

  1. INSPECT IGNITION SWITCH ASSEMBLY 
    1. Check the resistance.
      Fig 1: Identifying Ignition Switch Connector Terminals
      GTY161080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Measure the resistance according to the value (s) in the table below.

        Standard resistance

        Tester Connection Condition Specified Condition
        Between all terminals LOCK 10 kΩ or higher
        2 - 4 ACC Below 1 Ω
        1 - 2 - 4 ON Below 1 Ω
        5 - 6
        1 - 3 - 4 START Below 1 Ω
        5 - 6 - 7
scientia non olet · About LEMON Manuals