LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> 2ZR-FE Engine Control System >> Knock Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock sensor.

      Fig 1: Measuring Resistance Between Knock Sensor Terminals
      G04828436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals