LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2007 >> tC Base, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Other System >> Power Point Socket >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Point Socket: Installation

  1. INSTALL POWER POINT SOCKET ASSEMBLY 
    1. Align the socket with the notch on the power point socket cover and push the power point socket assembly in as hard as possible.
  2. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY UPPER (See  INSTALLATION  ) 
  4. INSTALL FRONT CONSOLE PANEL UPPER (See  INSTALLATION  ) 
  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See  INSTALLATION  ) 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Power Point Socket Cover
    G04867320Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals