LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2006 >> xA Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (1NZ-FE) >> Throttle Position Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE THROTTLE BODY ASSEMBLY 
    1. Remove the throttle body (see REMOVAL  ).
  3. REMOVE THROTTLE POSITION SENSOR 
    1. Remove the 2 screws and sensor.
      Fig 1: Removing Throttle Position Sensor
      G04153224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals