Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Item | Specification | |
|---|---|---|
| Minimum | Maximum | |
| The Monitor Will Run Whenever The Following DTCs Are Not Present | See "List of Disable a Monitor" table (On LIST OF DISABLE A MONITOR ) | |
| Case 1: | ||
| Vehicle Speed | 2 mph (3 km/h) | - |
| Idle | OFF | |
| Fuel Cut | OFF | |
| Time After Fuel Cut From ON To OFF | 5 sec | - |
| Intake Air Amount Per Revolution | 0.16 g/rev | - |
| Fuel System Status | Closed - Loop | |
| Case 2 (Output voltage): | ||
| Time While The Following Conditions A And B Are Met | 300 Sec (Engine Coolant Temperature Is Less Than 75°C (167°F)), 200 Sec (Engine Coolant Temperature Is 75°C (167°F) Or More) |
- |
| A. Fuel System Status | Closed-Loop | |
| B. Idle | OFF | |
| Deceleration Count (The Number Of Times Accelerating And Decelerating) | 30 times | - |
| Deceleration Is Counted Up When Vehicle Decelerates | 3 mph (5 km/h) / 2 sec | - |