Typical Enabling Condition
TYPICAL ENABLING CONDITION
| Item | Specification | |
|---|---|---|
| Minimum | Maximum | |
| The Monitor Will Run Whenever The Following DTCs Are Not Present | See "List of Disable a Monitor" table (On LIST OF DISABLE A MONITOR ) | |
| Freqency idle condition: | ||
| There Is History That The Following Conditions Were Met For 20 Seconds | (A) And (B) | |
| (A) Vehicle Speed | 40 km/h (25 mph) | - |
| (B) Engine Speed | 900 RPM | - |
| Time After Engine Start | 120 Seconds | - |
| Idle | ON | |
| Vehicle Speed | 5 km/h (3 mph) | |
| Fuel System Status | Closed Loop | |
| Engine Coolant Temperature | 40 °C (104 °F) | - |
| Secondary Air System | Not Operating | |
| Freqency cruise condition: | ||
| There Is History That The Following Conditions Were Met For 20 Seconds | (A) And (B) | |
| (A) Vehicle Speed | 40 km/h (25 mph) | - |
| (B) Engine Speed | 900 RPM | - |
| Time After Engine Start | 120 Sec | - |
| Idle | OFF | |
| Intake Air Amount | 4.2 g/s | 20 g/s |
| Fuel System Status | Closed Loop | |
| Engine Speed | 1000 RPM | 3500 RPM |
| Engine Coolant Temperature | 70 °C (158 °F) | - |
| Secondary Air System | Not Operating | |
| Slow slope condition: | ||
| There Is History That The Following Conditions Were Met For 20 Seconds | (A) And (B) | |
| (A) Vehicle Speed | 40 km/h (25 mph) | - |
| (B) Engine Speed | 900 RPM | - |
| Time After Engine Start | 120 Sec | - |
| Idle | ON | |
| Vehicle Speed | 5 km/h (3 mph) | |
| Fuel System Status | Closed Loop | |
| Engine Coolant Temperature | 40 °C (104 °F) | - |