Lower Control Arm Bracket Replacement

WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lower Control Arm Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1	Front Lower Control Arm Bushing Nut NOTE: Refer to Fastener Notice . Tighten: 150 N.m (110 lb ft)
2	Front Lower Control Arm Bushing Bolt (Qty: 2) IMPORTANT: When tightening the bolt to specifications, hold the bolt and torque the nut for the proper torque.
3	Front Lower Control Arm Bushing Nut (Qty: 2) Tighten: 195 N.m (144 lb ft)
4	Front Lower Control Arm Bushing Tip: The control arm bushing is NOT serviced separately, but with the mounting bracket.