October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Instrument Cluster Programming and Setup: Odometer

With the vehicle still in pass thru programming mode, use SPS to perform the following:

Select "IPC Setup" to program the odometer
Select "Next".
Select OK at the prompt 'Please install the new controller and select [OK] to proceed or select [CANCEL] to exit'.
Enter the correct odometer value and select the desired units (Miles or Kilometers).

After programming is complete, verify the IPC displays the correct odometer value.