Remote Power Steering Fluid Reservoir Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement . |
|
| 1 | Power Steering Cooler Hose Clamp Procedure: Remove as much power steering fluid from the remote power steering fluid reservoir as possible. |
| 2 | Power Steering Cooler Hose |
| 3 | Power Steering Fluid Reservoir Outlet Hose Clamp |
| 4 | Power Steering Fluid Reservoir Outlet Hose |
| 5 | Remote Power Steering Fluid Reservoir Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 6 | Remote Power Steering Fluid Reservoir Procedure: Fill and bleed the power steering system. Refer to Power Steering System Bleeding |