LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Sky Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC P0571 >> Circuit/System Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Testing

IMPORTANT: Fix any Brake System related DTCs or symptoms before using this diagnostic.
  1. Ignition ON, perform the brake pedal position (BPP) sensor calibration procedure and verify the BPP is calibrated properly. Refer to Brake Pedal Position Sensor Calibration .
    • If the BPP will not calibrate properly, replace the BPP.
  2. Ignition ON, observe the BPP Circuit Signal parameter in the ECM while depressing the brake pedal.
    • If the parameter reads Applied, test the stop lamp switch signal circuit for an open/high resistance, a short to ground or a short to voltage. If the circuit tests normal, replace the ECM.
    • If the parameter reads Released, refer to Stop Lamps Malfunction .
scientia non olet · About LEMON Manuals