LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Relay 3.9 W >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Crossover Pipe Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: Identifying Exhaust Manifold Heat Shield & Bolts - Left
    GM1679427Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the heater hoses from the heater pipes.
  3. Remove the nuts holding the heater pipes onto the throttle body.
  4. Position the heater pipes out of the way.
  5. Remove the exhaust crossover heat shield bolts (1).
  6. Remove the exhaust crossover heat shield (2).
    7. Fig 2: Identifying Exhaust Crossover Pipe
    GM1679429Courtesy of GENERAL MOTORS CORP.
  7. Remove the exhaust crossover pipe nuts (1).
  8. Remove the exhaust crossover pipe (2).
  9. Remove the exhaust crossover pipe seals.
scientia non olet · About LEMON Manuals