Rear Toe Adjustment
WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the adjuster nut (1).
- Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
- Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
Tighten: Tighten the nut to 140 N.m (103 lb ft).
- Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
- Test drive the vehicle.
IMPORTANT:
Make any adjustments to camber before setting toe.
IMPORTANT:
Left side toe adjustment is shown, right side toe adjustment is similar.
IMPORTANT:
Ensure that the toe settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.
NOTE:
Refer to Fastener Notice
.