LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the child tether anchor tab to the alignment hole in the rear shelf.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the child tether anchor bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 1: View Of Child Tether Anchors
    GM876611Courtesy of GENERAL MOTORS CORP.
  3. Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf (Early Production) or Trim Panel Replacement - Rear Window Shelf (Late Production) in Interior Trim.
  4. Close the anchor bezel, pressing into place until fully seated.
scientia non olet · About LEMON Manuals