Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

Position the shifter on the studs and install the front 2 nuts (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 rear nuts (3).
Tighten: Tighten the nuts to 25 N.m (18 lb ft).

Fig 1: Locating Floor Pan Grommet & Mounting Nuts

Courtesy of GENERAL MOTORS CORP.

Install the shift cables. Refer to Shift Control Cable Replacement .
Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.