September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Disconnect the intake air temperature (IAT) sensor connector.
Courtesy of GENERAL MOTORS CORP.
- Loosen the clamp at the air cleaner assembly.
Courtesy of GENERAL MOTORS CORP.
- Remove the outlet resonator duct from the air cleaner.
- Loosen the clamp at throttle body assembly.
- Disconnect PCV fresh air vent hose at cam cover.
- Remove the air outlet resonator/bolt.
- Remove the air cleaner attachment bolt.
- Remove the air cleaner assembly.
Courtesy of GENERAL MOTORS CORP.