LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Support In Hood Rod Retaining Clip
    GM1315798Courtesy of GENERAL MOTORS CORP.
  1. Position the hood hold open rod retainer to the radiator support. Press in until fully seated.
  2. Push the hood hold open rod into the retainer until fully seated.
  3. Install the retainer clip.
  4. Position the rod in the clip.
  5. Remove the hood support.
  6. Close the hood.
scientia non olet · About LEMON Manuals