LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Removing/Installing Camshaft Position Sensor
    GM897184Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the camshaft position (CMP) sensor harness connector.
  3. Remove the knock sensor 2 pigtail from the attachment clip.
  4. Remove the CMP sensor attachment bolt and remove the sensor.
scientia non olet · About LEMON Manuals